ina natr 12 pp bearing

Da max.:1062 mm; B1:380 mm; Fatigue load limit Pu:1460 kN; Calculation factor Y1:2.4; b:22.3 mm; d1:710 mm; Basic dynamic load rating C:12235 kN; Calculation factor Y2:3.6; Limiting speed:430 r/min; B:335 mm;

Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5600 rpm; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; d:65.000 mm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:4800 rpm; B:33.00 mm; Accessories:Two Seals; Sealed Speed Rating n3:3200 rpm;

P90°:71.2 kN; PG:1/4 NPT; h:42.069 mm; RG:3/8 NPT; Ca:55.804 mm; Pa:10.2 kN; R1:58.737 mm; N1:22.225 mm; Mass pillow block:28.1 kg; ba:38.894 mm;

Basic static load rating C0:80 kN; 2B:34 mm; d:25 mm; K:4 mm; T:36.5 mm; rc max.:0.6 mm; b:5 mm; da max.:34 mm; Mass bearing pair:0.55 kg; Reference speed:6700 r/min;

r1,2 min.:0.3 mm; r2 max.:1 mm; Lw:34.8 mm; Mass needle roller:5.36 g; Dw:5 mm; r1 max.:0.8 mm;

B1:199 mm; B:34 mm; B4:37 mm; d3:300 mm; G3:9 mm; Locking device:MB 48; A:6.5 mm; d:240 mm; Hydraulic nut:HMV 48E; Lock nut:HM 48 T;

Basic Dynamic Radial Load Rating C:63700 N; Oil Speed Rating Open/Shielded n2:4900 rpm; Grease Speed Rating Open/Shielded n1:4000 rpm; Basic Static Radial Load Rating Co:57000 N; Fillet Radius ra:1.50 mm; D:160.0000 mm; d:95.000 mm; B:20.00 mm;

Basic Static Radial Load Rating Co:8500 N; B:21.00 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:26500 N; d:35.000 mm; D:80.0000 mm; Oil Speed Rating n2:9000 rpm; Fillet Radius ra:1.50 mm;

H:222.25 mm; H2:44.45 mm; R1:65.088 mm; P120°:52.5 kN; Max. speed for PosiTrac Plus seal:1350 r/min; Housing:SAFS 024 KA; PG:1/4 NPT; ba:46.831 mm; Stabilizing ring:2 x 38151-24; Bearing:23024 CCK/W33;

Pa:25.4 kN; Bearing:23032 CCK/W33; H:287.337 mm; J max.:406.4 mm; Adapter sleeve assembly:SNW 3032x5.3/8; ba:59.531 mm; Initial grease fill:382.73 g; PG:1/4 NPT; H1:152.4 mm; End plug (suffix Y):EPR 16;

Mass bearing + sleeve:14.5 kg; Ba min.:10 mm; d1:170 mm; D1 ≈:240 mm; Calculation factor e:0.16; Calculation factor Y0:4; Limiting speed:2600 r/min; d2 ≈:209 mm; Calculation factor Y1:4.2; B4:30.5 mm;

Stabilizing ring:SR-30-0; End plug (suffix Y):EPR 16; Ca:82.804 mm; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; P180°:96.1 kN; Bearing:22230 CCK/W33; h:50.8 mm; Appropriate attachment bolt size G:1 in; P150°:80.1 kN;

J6:106 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Rα:45 °; End cover:ECY 207; Db1:88 mm; J7:15 mm; N4:2 mm; A5:22 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:12 mm;

T:39 mm; Fatigue load limit Pu:41.5 kN; Mass bearing:2.38 kg; d:100 mm; Calculation factor Y:2.1; Da max.:141 mm; B:39 mm; da max.:109 mm; r1,2 min.:2 mm; Ca min.:7 mm;

End plug (suffix Y):X-5217-4; A1:203.2 mm; Cap bolt:1 1/4-7 UNC; Initial grease fill:2154.6 g; P60°:557 kN; Ca:107.798 mm; Da:359.999 mm; Adapter sleeve assembly:SNP 3048x8.15/16; Mass pillow block:251 kg; Housing:SSAFS 048 KA;